Fim ɗin Masking/Na'urar Takarda Ta atomatik Pre-taped & Nadawa Lokaci Daya

Fim ɗin rufe fuska ta atomatik / takarda pre-tepe injin yana yankan gefen fim ɗin kuma laminate gefen tare da tef ɗin masking, tef ɗin wanki ko tef ɗin zane da dai sauransu, sake juyawa zuwa mitocin da ake buƙata. Ana amfani da fim ɗin masking / takarda sosai a cikin fenti na mota, zanen kayan ado na gida, abubuwan da ke jure ƙura da sauransu, don kare wurin da ba a sa ran za a fentin.

Tuntube mu

Ayyuka da Features

7 Janairu 2019

1.PLC sarrafa shirye-shirye, aikin allon taɓawa.

2.Double bango goyon baya ga nauyi kayan da dace da girma nisa da diamita kayan, Magnetic foda birki tashin hankali, da kuma atomatik tashin hankali iko.

3.Triangle nadawa na'urar iya ninka kan nisa fim / takarda lokaci daya don rage nisa.

4.Servo motor tare da madaidaicin mai ragewa na duniya, da ƙananan abin nadi da nadi na roba na sama don ciyarwa.

5.The takarda tube an gyarawa ta roba tsiri fadada axis, servo motor karfin juyi yanayin don sarrafa tashin hankali daidai.

7 Janairu 2019

6.Automatic hudu-axis musayar, atomatik yankan kayan, atomatik loading na takarda tube, atomatik saukewa na gama kayayyakin, da kuma cikakken atomatik samar. Ma'aikaci kawai yana loda albarkatun ƙasa.

7.The jujjuya ana sarrafawa ta hanyar bude-madauki servo motor, da bugun jini + photoelectric dual matsayi don yin jujjuya matsayi daidai.

8.Ultrasonic EPC, da kuma DC brushless servo drive don tabbatar da flatness na karshen surface na gama Rolls.

9.The encoder yana ƙididdige tsawon tsayi daidai, ana iya saita tsayin iska ba tare da izini ba, kuma ana sarrafa daidaiton injin na tsawon a + 1cm.

ma'aunin fasaha

Samfura	ZTZ500C
Matsakaicin fadin nisa	500mm (ko nisa na musamman)
Matsakaicin diamita mai buɗewa	600mm (ko nisa na musamman)
Ƙaddamar da ainihin ID na takarda	76.2mm (3 inch)
Nisa mai juyawa	50 ~ 500mm (ko nisa na musamman)
Matsakaicin diamita mai juyawa	Φ100mm
Sake mayar da ainihin ID na takarda	20mm/25.4mm/30mm/da sauransu. (zabi)
Gudu	0-200m/min
Faɗin tef	15-40 mm
Max diamita	Φ400mm
Nisa mai haɗe-haɗe	≥2.0mm
Matsakaicin juyawa	± 0.3mm
Ƙarfi	1P-220VAC± 10%, 50-60HZ, 2.5KW
Tushen iska	5-8kg/cm²
Nauyi	700kg
Girman	270024001600mm