UBhanyabhanya-bhanyabhanya obhalwe ngaphambili oteyithiweyo ngokuzenzekela/umatshini wePhepha (Ukuleyibhela ngokuzenzekela)

Ukuleyibhela okuzenzekelayo; Ukuncamathisela ngokuzenzekela kwitayiphu ephindwe kabini kumbindi wephepha okanye inkqubo yokutshiza iglu ezenzekelayo yokuzikhethela.

Umatshini wokubuyisela umva ngokuzenzekelayo awufumaneki kuphela ekwenzeni ifilimu yokufihla ifilimu / iphepha elifakwe ngaphambili kunye ne-tape lamination, kodwa iyafumaneka kwifilimu / ukubuyisela iphepha lokubuyela umva ngaphandle kwetape lamination.
Inkqubo yokuvelisa ifilimu yokufihla ifilimu / iphepha, ukusika ifilimu, kunye ne-laminate ifilimu / umgca wephepha kunye ne-masking tape, i-washi tape okanye i-cloth tape njl, ukubuyisela iimitha ezifunekayo.
Inkqubo yokuveliswa kwefilimu / umqulu wephepha (ngaphandle kwe-tape), unamathele ngokuzenzekelayo kwi-tape yecala eliphindwe kabini kwiphepha le-coreor spay glue kumbindi wephepha ukuze unamathele ifilimu / iphepha, emva koko ubuyisele umva ngokuzenzekelayo, ukuleyibheli ngokuzenzekelayo xa umqulu ugqityiwe.

Qhagamshelana nathi

Imisebenzi kunye neempawu

Nge-7 kaJanuwari 2019

Ulawulo lweprogram ye-1.PLC, ukusebenza kwesikrini sokuchukumisa.

I-2.I-Uwinding ithatha i-pneumatic shaft, i-magnetic powder brake tension, kunye nolawulo lwe-tension oluzenzekelayo.

I-3.I-traction engundoqo ilawulwa yi-1.0KW ye-servo motor kunye ne-reduced planetary reducer echanekileyo, kunye ne-roller ephantsi yokupholisha kunye ne-roller ye-rubber ephezulu yokutyisa.

I-4.I-tube yephepha igxininiswe yi-axis yokwandisa i-rubber strip, imodi ye-servo motor torque ukulawula ukuxhatshazwa ngokuchanekileyo.

I-5.I-automatic four-axis exchange, ukusika ngokuzenzekelayo izinto eziphathekayo, ukulayishwa ngokuzenzekelayo kweetyhubhu zephepha, ukukhulula ngokuzenzekelayo iimveliso ezigqityiweyo, kunye nokuveliswa ngokuzenzekelayo. Umsebenzi ulayisha kuphela imathiriyeli ekrwada.

I-6.Xa ingadityaniswa ne-tape, i-core yangaphakathi yephepha kunye nezinto eziphathekayo ziboshwe nge-tape ephindwe kabini okanye i-spray glue ukufezekisa ukudibanisa okuzenzekelayo okuqhubekayo.

Nge-7 kaJanuwari 2019

7.I-roll yokugqiba ivalwe ngeeleyibhile zephepha ezifakwe ngokuzenzekelayo okanye ngeetape ezikhethiweyo.

I-8.I-overturn ilawulwa yi-open-loop servo motor, kunye ne-pulse + photoelectric dual positioning ukwenza indawo yokuguqula ngokuchanekileyo.

I-9.I-Ultrasonic EPC, kunye ne-DC brushless servo drive ukuze kuqinisekiswe ukunyanzeliswa komphezulu wesiphelo sokugqiba imiqulu.

10.I-encoder ibala ubude ngokuchanekileyo, ubude be-winding bunokusetwa ngokungqongqo, kwaye ukuchaneka komatshini wobude kulawulwa kwi +1cm.

I-11.Indlela yokusika izinto eziphathekayo: isixhobo sokusika ummese wobugcisa.

Iiparamitha zobugcisa

Umzekelo	ZTZ350B
Ubukhulu bokukhulula ububanzi	400mm
Ubukhulu bedayamitha yokukhulula	600mm
Ukukhulula i-ID yephepha engundoqo	76.2mm (3 intshi)
Ukubuyisela umva ububanzi	50 ~ 350mm (okanye ububanzi ngokwezifiso)
Ubungakanani bokubuyisela umva umda	Φ100mm
Ukubuyisela umva i-ID yephepha eliphambili	20mm/25.4mm/30mm/etc. (ukhetho)
Isantya	0-200m/min
Tape ububanzi	15-40mm
Tape ubukhulu obukhulu	Φ400mm
Ububanzi obuthe kratya	≥2.0mm
Ukubuyisela umva ukuchaneka	±0.3mm
Amandla	1P-220VAC±10%, 50-60HZ, 3.5KW
Umthombo womoya	5-8kg / cm²
Ubunzima	600kgs
Ubungakanani	265016501600mm